1. Wall cleaning
If you want to paint more evenly, the pre-treatment work must be done well. The substrate should be cleaned up before painting to make the surface of the wall to be initially smooth and clean. If the wall surface has been painted with the primer, be sure to use sandpaper to smooth the unevenness after the primer is dry, so that the overall uniformity and smoothness during painting will be higher.
2. Toning
In addition to the uneven paint surface, pay attention to the color of the wall paint to avoid uneven color, which is very undesirable paint effect. When toning, you must first calculate the amount of paint, and stir evenly according to a certain ratio when toning, so that the brushing of the product will be smoother.
3. Dip the paint
Usually the uneven painting is because there are more paint stains on the painted products, and the amount of paint is too thick at the beginning of painting, which is one of the reasons for the uneven painting. Therefore, be careful not to make the brush too full of paint. The brush with paint can be gently wiped on the surface of the container, and the excess paint on the brush is passed over.
4. Paint
In addition to the preparation work, the important step to make the paint uniform is the construction, which is usually done in three stages, and the paint is usually started from a high place, so as to avoid the dirty paint from being reused.
5. Check
After completing the above steps, whether the effect of brushing the product is uniform depends on the inspection. When monitoring, you need to pay attention to whether there are obvious chromatic aberrations or obvious protrusions and other defects. At this time, you can hit the light on the wall, so the effect will be more clear at a glance.
